1/20 Scale Multimedia Resin Kit 115 Resin Parts Detailed line-art Instructions Multimedia materials - springs, acrylic hemisphere, wire, brass/metal rod, styrene, pearl eyes. Mounts directly onto a Robosweep base (Robosweep not included) Shout out to Federation Models whom have done an outstanding job with the casting. Parts are high-quality, flash-free and bubble-free. Please note, the hull is large and was cast as one piece. The lower front edge may have require some minor clean up or repair where the resin was poured in. Otherwise, this kit will impress. The Kit Instructions Robosweep The Sirene kit will mount fully onto the Robosweep underside...allowing you to motorise the kit. Robosweep is not included with the kit, but you can find these on Ebay for around $20. I have a few spare Robosweeps...so send me an email and I might be able to hook you up. To mount onto the Sirene, simply unscrew the base from the Robosweep, trim 3 small plastic flanges and screw into the Sirene. Ordering Information Oct 2017 - Please contact me with enquiries.